A special adapter to connect the control units on the table.
Performs automatic power management, and boot pins through the J2534 adapter.*
Required to read in the BSL mode for control units Bosch M7.8/ME7.8.8 and Continental SIM2K-25x/26x
* - tested and guaranteed works wi..
$60.97 $57.92
The AISIN cable is designed for use with AISIN TCUs. These units are installed in BMWs, Minis, Volvos, Chinese-made vehicles, and others.
This cable is created to work with the 94 Aisin SH705x TCU Bootloader module from PCMFlash!
This cable can be connected directly to Scanmatic 3/2/..
$67.75
The AISIN-2 cable is designed for use with AISIN TCUs. These units are installed in BMWs, Minis, Volvos, Chinese-made vehicles, and others.
This cable is created to work with the 94 Aisin SH705x TCU Bootloader module from PCMFlash!
This cable can be connected directly to Scanmatic 3/2/2PR..
$67.75
The cable is available in two versions:
1. Universal adapter for SM2/SM2PRO + PCMflash scanner with automatic control of power supply to the unit.
Indication:
Red - power adapter
Green - power on of the POWER+12v unit
Purpose of the cable wires:
..
$54.20 $51.49
The 7DCT300 CAN FD Scanmatic 3 cable is used to connect to the ECU connector of HAVAL vehicles.
The cable has two operating modes:
Pressed (first) - Identification, writing
UnPressed (seconde) - Reading
The cable can be directly connected to Scanmatic 3 (has CAN FD)
Th..
$94.84
The 7DCT450 Scanmatic 3/2/2Pro cable is used to connect to the ECU connector of HAVAL vehicles (EST80.DI)
The cable can be directly connected to Scanmatic 3/2/2Pro
The cable is operated using module 86 of the PCMFlash loader - We recommend downloading the documentation
..
$81.30
Programming cable for control units SM2-DQ200 (0AM) .
It works with module 58 "Temic DSG/CVT" of the PCMFlash programmer.
They are connected directly to the Scanmatic SM2/SM2PRO/SM3 adapter
The cable length is 0.7 meters.
The cable is operated using module 58..
$81.30
Programming cable for control units SM2-DQ250 (02E, 0D9)
It works with module 58 "Temic DSG/CVT" of the PCMFlash programmer.
They are connected directly to the Scanmatic SM2/SM2PRO/SM3 adapter
The cable length is 0.7 meters.
The cable is operated using ..
$81.30
Programming cable for control units DSG/CVT DQ500 (0BH/0BT).
It works with module 58 "Temic DSG/CVT" of the PCMFlash programmer.
They are connected directly to the Scanmatic SM2/SM2PRO/SM3 adapter
It can also be used to connect to DQ380/DQ381 units and work ..
$81.30
Getrag 7DCT Scanmatic 3 cable is used to connect to the transmission ECU connector of Chery vehicles.
The cable can be directly connected to Scanmatic 3/2/2Pro
The cable is operated using module 82 of the PCMFlash loader - We recommend downloading the documentation
..
$81.30
SM2-ME17 China cable for programming Bosch ME17/ME17 units.8.8/ME17.8.8.1/ME17U6 China.
The cable allows you to work with modules:
PCMFlash
Module 51 "China"
Module 71 "Bosch MEDC17 Bootloader"
BitBox
"China Bosch Petrol"
..
$121.94
Programming cable for control units BMW
It works with module 92 of the PCMFlash programmer and BitBox Modules Bosch MG1/MD1 BENCH [SM2/SM3 only] and Bosch MG1/MD1 GEN2 BENCH [SM2/SM3 only]
PCMflash Module 92 Bosch MD1/MG1 Bootloader
BMW MD1CS001
MD1CP002/032
..
$135.49
CombiBox is designed to connect the control unit to the Loader Combiloader and adapter DIALink 'on the table' and switching the supply voltage signals to GPT1, GPT2, and signal conditioning BOOT, CNF1.
Power supply.
To work CombiBox must submit the stabilized voltage..
$94.84
CombiBox is designed for connecting the control unit to the PCMflash loader and the j2534 adapter "on the table" and switching power supply voltages and generating BOOT, CNF1 signals. When used with the Scanmatik 2 (PRO) adapter, the device allows you to generate gpt1 and GPT2 signals necessary f..
$101.62
MT62.1/MT63.2-Scanmatic 3 cable for programming Delphi MT62.1/MT63.2 China ECUs.
For ease of use, the cable has a mode switch:
Reading and Indetification
Writing and Identification
also writing to work with ECU Delphi MT62.3 from Cherry PHEV
If ..
$121.94
This device is designed to connect the control unit to the loader software 'on the table' and switching supply voltages and GPT1, GPT2, and the formation of signals of BOOT, CNF1. Working in automatic mode with the loader CombiLoader, and in manual mode, any bootloader which is 'the logic manual'..
$88.07
Cable for overwriting the ECU with a 55 pin connector using the Combiloader and the corresponding modules.
..
$33.87
A cable for overwriting an ECU with an 81 pin connector using a Combiloader and the corresponding modules.
..
$33.87
A special adapter to connect the control units on the table.
Performs automatic power management, and boot pins through the J2534 adapter.*
Required to read in the BSL mode for control units Bosch M7.8/ME7.8.8 and Continental SIM2K-25x/26x
* - tested and guaranteed works wi..
$54.20 $51.49
The cable is divorced all the necessary contacts for reading passwords GPT. The cable can be used with the module Bosch MEDC17 BSM.
..
$47.42
Cable to connect your ECU 'on the table' and programming using Combiloader and ACC. modules.
..
$40.65
Used when working with blocks Bossch ME17.9.7 and ME17.9.71 VAZ/UAZ.
The cable is divorced all the necessary contacts for reading passwords GPT. The cable can be used with the module Bosch MEDC17 BSM.
On the block there are 2 switch, the first turns the power on +12V at DiaLink, a second ..
$47.42
In case of lack of communication when you connect to the vehicle diagnostic OBD2 connector use this cable to connect to the underhood 3-pin diagnostic connector.
..
$24.39
Cable to overwrite the ECU M74 with Combiloader and ACC. module. The new version with the socket of OBD (CAN)
..
$47.42
Cable to overwrite the ECU М74К with Combiloader.
..
$29.81
Cable for read and write ECU М86 with Combiloader and the module. In the cable combined essential variations pins CAN. Have a switch pin enable programming.
..
$47.42
Cable to work with the ECU Mikas-12 with CombiLoader.
..
$27.10
Cable for recording the M74.8 ECU using the Combiloader and the corresponding module.
..
$40.65
Cable for use with the BitBox module for reading and writing Kefico SIM2K-510 control units installed in diesel vehicles of Korean brands Kia and Hyundai.
Kia/Hyundai Kefico SIM2K-510 TC297 8MB BENCH-CAN (FID:593)
Allows you to carry out
Identification of the software version,
Rea..
$94.84
Cable for use with the BitBox module for reading and writing Vitesco/Continental SIM3K-540/541/542/543 control units, which are installed on gasoline-powered cars of Korean brands Kia and Hyundai..
Kia/Hyundai Vitesco/Continental SIM3K-54X TC277 4MB BENCH-CAN (FID:550)
..
$94.84
Cable to overwrite the ECU with Combiloader and relevant modules through the DLC.
..
$24.39
Cable to connect your ECU 'on the table' and programming using Combiloader and related modules. Version CAN + GPT
..
$54.20 $51.49
The 7DCT300 Scanmatic 2/3 cable is used to connect to the ECU connector of HAVAL vehicles.
The cable has two operating modes:
Pressed (first) - Identification, writing
UnPressed (seconde) - Reading
The cable can be directly connected to Scanmatic 3 (has CAN FD)
The cab..
$94.84
The 7DCT330 Scanmatic 2/3 cable is used to connect to the ECU connector of HAVAL vehicles.
The cable has two operating modes:
Pressed (first) - Identification, writing
UnPressed (seconde) - Reading
The cable can be directly connected to Scanmatic 2/3
The cable is opera..
$94.84
The Bosch MG1US008 Type 1 cable allows you to work with the Combiloader and connects to the Universal V2, V3, V4 board.
This cable can work in conjunction with the Combiloader module with the Bosch MG1 China module.
The Bosch MG1US008 Type 1 cable allows you to connect to the Bosch MG1US0..
$108.39
-150x150.jpg "Cabel DQ250 for Scanmatik")
-150x150.jpg "Cabel DQ500 for Scanmatik")
%20(1)-150x150.jpg "Universal cable for CombiLoader + CAN + GPT")
