ChipTuningPro7 Modules

This module allows you to chip-tune UAZ Pickup and Patriot 2023+ cars equipped with a Chinese AECS ECU. Programming of the ECU is carried out using the CombiLoader loader. When the firmware is saved, checksums are automatically recalculated. Research with the help of reverse engineering of the control program allowed us to create an unparalleled tool for high-quality chip tuning ..

In stock

AECS UAZ

Basic kit: GM ISFI-2S VAZ, the first serial electronic control system on domestic cars. January 4 VAZ, second serial electronic system of injection control, the domestic counterpart of ISFI-2S. Used since 1995 January-5.1.x VAZ, a domestic analogue system Bosch M1.5.4. Used since 1999. Jan-7.2 Cars VAZ. Used since 2003. January-7.2+ ..

In stock

* Base set of modules is

The module allows for professional chip tuning of cars "Niva Legend 21214" and "Niva Travel 2123" of the 2022 model year with an electronic gas pedal (EGAS) equipped with the latest M74.9 ECU. More than 900 calibrations of the M74.9 control system are available for editing, allowing virtually unlimited possibilities for chip tuning: starting modes, UOZ, fuel supply with dynamic corrections and fuel film, torque model, EGAS ..

In stock

74.9 Niva

This module allows you to perform chip tuning of bi-fuel cars equipped with the Abit A12.2 ECU. The ECU is programmed using the CombiLoader loader. When saving the firmware, the checksums are automatically recalculated. Research with the help of reverse engineering of the control program allowed us to create an unparalleled tool for full-fledged chip tuning of bi-fuel cars equipped with an ABIT A12.2 ECU...

In stock

Abit A12.2

This module allows chip tuning of diesel trucks and commercial vehicles, as well as construction equipment equipped with the Abit M240 ECU. Programming of the ECU is carried out using the CombiLoader loader. Research with the help of reverse engineering of the control program allowed us to create an unparalleled tool for full-fledged chip tuning of trucks and commercial vehicles equipped with an ABIT M240..

In stock

Abit M240

The module allows chip tuning of diesel trucks and commercial vehicles equipped with the Abit MD22 and MD22A ECUs. Programming of the ECU is carried out using the CombiLoader loader Research with the help of reverse engineering of the control program allowed us to create an unparalleled tool for full-fledged chip tuning of trucks and commercial vehicles equipped with the ABIT MD22 ECU. This..

In stock

ABIT MD22

The module allows to make the chip tuning Opel and Chevrolet vehicles that equipped with ECU ACDelco E83. Examples of vehicles equipped with this type of ECU: Opel Astra J A16XER, A18XER Opel Astra J, Opel Astra J A16LET, Opel Corsa D A12XER, A14XER Opel Corsa D, Opel Insignia A16XER, A18XER Opel Insignia, Opel A14NET Meriva B, Chevrolet Cobalt 1.5. ..

In stock

ACDelco E83

For chip tuning Hyundai and Kia with diesel engine (CRDI). ..

In stock

Bosch EDC15C2

The Bosch EDC7UC31 GAZ module is designed for chip tuning of GAZ and MAZ cars with YAMZ-5344.20, YAMZ-53416, YAMZ-53441.20, YAMZ-53442, YAMZ-536, YAMZ-53601, YAMZ-53602, YAMZ-53603, YAMZ-53613, YAMZ-53622, YAMZ-53623, YAMZ-53624, MMZ-245 diesel engines.7. Supported firmware (software versions P765.110, P986.200, P986.211), EDC7UC31 GAZ module: P_986.2.0.0_YMZ-53416_S3.5_20.05.2015 P_986.2.0.0_YM..

In stock

Bosch EDC7UC31 GAZ/MAZ

The Bosch EDC7UC31 KAMAZ module is designed for chip tuning of KAMAZ vehicles with diesel engines of the KAMAZ-740 family. Supported firmware (software versions P702.141, P986.310), EDC7UC31 KAMAZ module: 702V141_740.60-360-290812_5460-4010142-01 702V141_740.60-360-290812_6460-4010122-01 702V141_740.602-360-170214_5350-4010121-01 702V141_740.602-360-170214_6460-4010122-01 702V1..

In stock

Bosch EDC7UC31 KAMAZ

Bosch EDC7UC31 MAZ / KRAZ / URAL

In stock

The Bosch EDC7UC31 MAZ / KRAZ / URAL module is designed for chip tuning of MAZ, KrAZ, MZKT, Ural cars and generator sets with diesel engines. Supported firmware (software versions P766.120), module EDC7UC31 MAZ / KRAZ / URAL: P766_120_MAZ_YAMZ-650_C_14_w_o_Cr_Ct P 766_120_766 V 120_MAH_YAMZ650.10_5440A9_3097D1C000_S11 P766_120_766V120_MAZ_YAMZ650.10_5440A9_3097D3C000_S06 ..

For chip-tuning of automobiles in China, equipped with ECU Bosch M7.8. ..

In stock

Bosch M7.8 China

For chip-tuning of automobiles in China, equipped with ECU Bosch M7.9.7 and M7.9.7+. ..

In stock

Bosch M7.9.7 China

For chip tuning Hyundai vehicles equipped with KEFICO ECU or Bosch 7.9.7. ..

In stock

Bosch M7.9.7 Hyundai

For chip-tuning KIA vehicles equipped with KEFICO ECU or Bosch 7.9.7. ..

In stock

Bosch M7.9.7 Kia

This module allows to make the chip tuning Hyundai and KIA vehicles that equipped with ECU Bosch M(G)7.9.8 or KEFICO. Supported versions: PM98A440K PM98A442G PM98A533O PM98A742J PM98A833F PM98A833H PM98A833J PM98A833K PM98A833O PM98A840I PM98A840K PM98A842F PM98A842G PM98A842M PM98A842N PM98A842O PM98AA33F ..

In stock

Bosch M7.9.8 Hyundai/Kia

Bosch ME17.9.11/12/13 Hyundai/Kia

In stock

For chip tuning Hyundai and Kia with the control units Bosch ME17.9.11/12/13 ..

Bosch ME17.9.11/12/13 Hyundai/Kia dual-mode AT

In stock

The module is designed to create dual-mode firmware with a fully customized set of calibrations for the second mode. There is a possibility of fuel pump disconnection in any of the modes (a small portion of the firmware may not support this feature). You can also set the delay of switching modes in a wide range. Note: to use these modules requires a license to edit the firmware of the appropriate type! Fe..

Bosch ME17.9.21 Hyundai/Kia dual-mode AT

In stock

The module is designed to create dual-mode firmware with a fully customized set of calibrations for the second mode. There is a possibility of fuel pump disconnection in any of the modes (a small portion of the firmware may not support this feature). You can also set the delay of switching modes in a wide range. Note: to use these modules requires a license to edit the firmware of the appropriate type! Fe..

The module is designed for chip-tuning of cars Suzuli SX4 and Vitara (engine capacity 1.6 L), equipped with Bosch ME17.9.61. Please note: Firmware families Bosch МЕ17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to use loader only CombiLoader. Saving in the usual BIN format is also possible. Write the firmware with a modified calibrati..

In stock

Bosch ME17.9.61 Suzuki

Bosch ME17.9.7 and Bosch ME17.9.71 Oise Registrar

In stock

The module allows you to view and edit data recorder, which are stored in the EEPROM. It is possible to work as with binary EEPROM images (files .eep), and with container SMS-Soft Container File (files .bcf). When you save the EEPROM image are automatically recalculated checksum of the service areas of the Registrar. Work with the Registrar: ..

Bosch ME17.9.7 VAZ, the Registrar

In stock

The module allows you to view and edit data recorder, which are stored in the EEPROM. It is possible to work as with binary EEPROM images (files .eep), and with container SMS-Soft Container File (files .bcf). When you save the EEPROM image are automatically recalculated checksum of the service areas of the Registrar. ..

Bosch ME17.9.7/71 VAZ/UAZ

In stock

Additional module for chip-tuning of cars VAZ and UAZ equipped with ECU M(E)17.9.7 and M(E)17.9.71 with electronic gas pedal and a manual throttle control. The module allows for complete customization of the engine control ME17. Change all the most important calibration, including torque model, E-GAS, lambda control, mask error, limiters of speed and revs. The module generates the checksums and..

Bosch ME17.9.7/71 VAZ/UAZ dual-mode AT

In stock

The module is designed to create dual-mode firmware with a fully customized set of calibrations for the second mode. There is a possibility of fuel pump disconnection in any of the modes (a small portion of the firmware may not support this feature). You can also set the delay of switching modes in a wide range. Note: to use these modules requires a license to edit the firmware of the appropriate type! Fe..

The modl is designed for chip-tuning Peugeot and Citroen cars with naturally aspirated petrol engines with electronic throttle, Bosch ME7.4.5 ECU. Supported software versions: 08Sg0_D08Sg0 11Sb0_D11Sb0 13Sd0_D13Sd0 13Tb0_D13Tb0 18Ta0_D18Ta0 19Te0_D19Te0 The module works in conjunction with ChipTuningPRO 7.2020 or higher. ECU programming is carried out using the Comb..

In stock

Bosch ME7.4.5 PSA

Bosch ME9.1 Chevrolet Captiva

In stock

For chip tuning cars Chevrolet Captiva and Opel Antara with the engine volume of 3.2 L. ..

Bosch MED17.1.6 VW Touareg 3.6 FSI

In stock

The module is designed for chip-tuning VW Touareg 3.6 FSI engines CGRA CMTA and equipped with Bosch MED17.1.6. Please note: Firmware families Bosch МЕ17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to use loader only CombiLoader. Saving in the usual BIN format is also possible. Write the firmware with a modified calibration diagnostic ..

Bosch MED17.9.8 Hyundai/Kia dual-mode AT

In stock

The module is designed to create dual-mode firmware with a fully customized set of calibrations for the second mode. There is a possibility of fuel pump disconnection in any of the modes (a small portion of the firmware may not support this feature). You can also set the delay of switching modes in a wide range. Note: to use these modules requires a license to edit the firmware of the appropriate type! Fe..

The module allows you to produce professional chip tuning of motorcycles (CF-Moto X6 EFI, etc.) ECU Bosch MSE3.0. The programming of this ECU is carried out using a Bosch module M(E)7.9.7 (OBDII) loader CombiLoader. Deep research (reverse engineering) of the program control allowed us to create unparalleled tool for a full chip-tuning ATV equipped with ECU Bosch MSE3.0. You can edit all the nec..

In stock

Bosch MSE3.0

Continental SIM2K-241/242/245

In stock

Additional module for chip tuning Hyundai and Kia, ECU Continental (Siemens) SIM2K-241/242/245. Supported versions: KR77355119 KR77355121 KR77355122 KR77355137 KR77395114 (in development) KR77395116 KR77395119 KR77315135 KR77315138 Features of the module: Professional module — 750 calibration maps (for version KR77395119). The possibi..

$208.92

In stock

Delphi MR-140/HV-240

For chip-tuning Chevrolet. ..

The module allows you to produce professional chip tuning motorcycles, the Delphi MT05 ECU (firmware size 128 KB) and Delphi MT05.2 (firmware size 256 KB). The programming of this ECU is using the module Delphi MT-05 loader CombiLoader. Deep research (reverse engineering) program management this ECU is allowed to create a new and unique tool for full chip-tuning vehicles that equipped with ECU ..

In stock

Delphi MT05

For chip-tuning of cars of Chinese production (Great Wall Hover, Great Wall Safe, BYD F3, Chery Tiggo, etc.). ..

In stock

Delphi MT20U

For chip-tuning of cars of Chinese production (Great Wall Hover, Great Wall Safe, BYD F3, Chery Tiggo, etc.). ..

In stock

Delphi MT20U2

For chip-tuning Chevrolet and Geely Emgrand. ..

In stock

Delphi MT80

The module is designed for chip tuning of Geely vehicles equipped with DSI TCM automatic transmission. Module Features: Limited module with a limited number of calibrations! The module calculates the COP. Hardware versions 02F and 02R are supported. Supported software versions: HW02F_104_010_005_000_001 HW02F_104_010_009_000_000 HW02F_104_011_003_000_000 HW0..

In stock

DSI TCM Geely

This module allows you to produce a chip tuning Daewoo vehicles equipped with the GM DELCO ECU ITMS-6F IEFI and-6. The module works in conjunction with ChipTuningPRO 6.74 or higher. ..

In stock

GM Daewoo

$23.21

In stock

M73

Cars VAZ. Used 2008 ..

The module allows you to convert any serial in three-mode version. Support switching complete sets of calibrations, including identifiers and the mask of DTC. Toggle options: channel or DTV channel ДК2. Provided disabling the fuel pump (with programmable delay) and the injectors individually for each mode. This module works only if you have a license for the module M74. ..

In stock

M74 multimode

The module allows you to produce professional chip tuning of cars VAZ with electronic gas pedal (EGAS), equipped with the latest ECU M74. Also supports editing firmware ECM M74K (VAZ 'Classic', without an electronic gas pedal). Edited over 380 calibrations of the control system M74: starting modes, advance angle, the fuel with dynamic adjustments, torque model calibration of the system EGAS, mask error, etc. the Checksum is..

In stock

M74 WHA

M74.5 and M75 (FOR ITELMA) Registrar

In stock

The module allows you to view and edit data recorder, which are stored in the EEPROM. It is possible to work as with binary EEPROM images (files .eep), and with container SMS-Soft Container File (files .bcf). When you save the EEPROM image are automatically recalculated checksum of the service areas of the Registrar. ..

The module is designed to create dual-mode firmware with an individual set of calibrations for the second mode. When you create a dual-mode firmware of the usual standard you can select the calibration, which will create steam in the second set, getting an individual set of calibrations needed for you. The number of calibrations is limited by the availability of free space in the firmware. To create pairs suitable constants..

In stock

M74.5 dual-mode AT

New car equipped with an engine 21127 with adjustable geometry intake tract. ..

In stock

M74.5 vases

The module allows for professional chip tuning of cars "Niva Legend 21214" and "Niva Travel 2123" of the 2022 model year with an electronic gas pedal (EGAS) equipped with the latest M74.8 ECU. More than 900 calibrations of the M74.8 control system are available for editing, allowing virtually unlimited possibilities for chip tuning: starting modes, UOZ, fuel supply with dynamic corrections and fuel film, torque model, EGAS ..

In stock

M74.8 Niva

The module allows you to convert the serial software M74.9 Niva into a dual-mode version. Switching of complete calibration sets is supported, excluding identifiers. Switching by a low level of the DC2 ADC channel. It is possible to turn off the fuel pump (by standard calibrations) individually for each mode. This module works only if you have a license for the M74.9 Niva module. &nb..

In stock

M74.9 Niva MULTIMODE

M74.9 Niva/Grant For owners of the M74.8 module

In stock

The module allows to make the chip tuning Opel and Chevrolet vehicles that equipped with ECU ACDelco E83. Examples of vehicles equipped with this type of ECU: Opel Astra J A16XER, A18XER Opel Astra J, Opel Astra J A16LET, Opel Corsa D A12XER, A14XER Opel Corsa D, Opel Insignia A16XER, A18XER Opel Insignia, Opel A14NET Meriva B, Chevrolet Cobalt 1.5. ..

The modules allow chip tuning of diesel trucks and commercial vehicles, as well as construction equipment equipped with Abit M240 and M240S1 (CAN) ECUs. Programming of the ECU is carried out using the CombiLoader loader. Research with the help of reverse engineering of the control program allowed us to create an unparalleled tool for full-fledged chip tuning of trucks and commercial vehicles equipped with..

In stock

M74.9 OLT

The module is designed to create dual-mode firmware with an individual set of calibrations for the second mode. When you create a dual-mode firmware of the usual standard you can select the calibration, which will create steam in the second set, getting an individual set of calibrations needed for you. The number of calibrations is limited by the availability of free space in the firmware. To create pairs suitable constants..

In stock

M75 dual-mode AT

New cars VAZ with electronic gas pedal. ..

In stock

M75 WHA

M86 (Cars UAZ, AT ITELMA)

In stock

New ECU M86 applies to cars UAZ Pro. Manufacturer software hardware — NPP ITELMA. This module allows you to produce professional chip tuning UAZ Pro equipped ECU M86 with ITELMA. Edited more than 950 calibration management system M86, which allows full professional chip tuning UAZ. The module works in conjunction with ChipTuningPRO 7.2017 or higher. The ECU programming is done using the loader CombiLoader..

M86 (FOR ITELMA) dual-mode FOR

In stock

The module is designed to create dual-mode firmware with an individual set of calibrations for the second mode. When you create a dual-mode firmware of the usual standard you can select the calibration, which will create steam in the second set, getting an individual set of calibrations needed for you. The number of calibrations is limited by the availability of free space in the firmware. To create pairs suitable constants..

New ECU M86 applies to cars Lada Vesta and X-Ray. The M86 project is a further development of motor control M74/M75/M74.5. Manufacturer of hardware — NPP ITELMA. By analogy with the systems of the previous generation M74 and M75, the new project will apply two different types of software FOR the production of vases and production ITELMA. This module allows you to produce professional chip-tuning Vesta and X-Ray, equippe..

In stock

M86 (ITELMA)

M86/M74M (FOR VAZ) + MULTIMODE

In stock

ECU M86 applies to cars Lada Vesta and X-Ray. The M86 project is a further development of motor control M74/M75. The manufacturer of the ECU — NPP ITELMA. By analogy with the systems of the previous generation M74 and M75, the new project will apply two different types of software FOR the production of vases and production ITELMA. M86 is built on a high-performance 16-bit microcontroller Infineon SAK-XC2768 having, compared..

New ECU M86 applies to cars Lada Vesta and X-Ray. The M86 project is a further development of motor control M74/M75/M74.5. Manufacturer of hardware — NPP ITELMA. By analogy with the systems of the previous generation M74 and M75, the new project will apply two different types of software FOR the production of vases and production ITELMA. This module allows you to produce professional chip-tuning Vesta and X-Ray, equippe..

In stock

M86I (ITELMA)

This module enables the following additional functions: Mixing of the calibration firmware Bosch ME17.9.7 VAZ and UAZ. The function requires the module ME17.9.7 VAZ/UAZ. Patch to disallow read firmware Bosch ME17.9.7, Bosch ME17.9.71 (VAZ, UAZ), Bosch ME17.9.11/12 and ME17.9.21 (Kia, Hyundai) diagnostic methods. The feature requires any module to work with the ECU of the family ME17. New! The function of..

In stock

ME17 behavior module

ZAZ Slavuta, Daewoo Ukrainian Assembly, GAZ. ..

In stock

MIKAS-10.3 (M113, M114)

$23.21

In stock

MIKAS-11/VS-8

This module allows you to make chip-tuning of cars GAZ and UAZ vehicles that equipped with ECU Mikas-11, Mikas-11CR, Mikas-11ET, VS-8. Supports the following versions: The number of the ECU and firmware version of the ECU 824.3763.001-05 0789_101 821.3763.000-01 0789_051 822.3763.001-01 0788_054 821.3763.000-01 0788_059 821.3763.000-02 0788_061 805.3763.000-01 0788_06..

In stock

In stock

MIKAS-12 dual-mode soft

The family of modules includes three separate module from the ECU to the M74.5, M75, MIKAS-12 or M86 (FOR ITELMA, firmware, VAZ and UAZ), which can be purchased independently. All the modules have identical functionality and are designed to create dual-mode firmware with an individual set of calibrations for the second mode. When creating the creation of dual-mode firmware of the usual standard you can select the calibratio..

Mikas-12 M86 and UAZ (FOR ITELMA) Registrar

In stock

The module allows you to view and edit data recorder, which are stored in the EEPROM. It is possible to work with binary images EEPROM size of 4 KB or 64 KB (the file .eep), and with container SMS-Soft Container File (files .bcf). When you save the EEPROM image are automatically recalculated checksum of the service areas of the Registrar. ..

In stock

In stock

Mitsubishi Lancer 1.5 L 10

For chip-tuning cars Mitsubishi Lancer 10 with engines of 1.5 L. ..

For chip-tuning cars Mitsubishi Lancer 10 (except vehicles with engines of 1.5 L). ..

In stock

Mitsubishi Lancer 10

Mitsubishi Outlander XL Mitsubishi ASX

In stock

The module allows you to produce professional chip tuning Mitsubishi Outlander XL with engines of 2.4 L and 3.0 L (manual and CVT) and Mitsubishi ASX with dvigatelem 2.0 L and Citroen C-Crosser and Peugeot 4007 made on the platform of the Outlander. Has no analogues on the number of calibrations available on the market domestic and abroad. The module works with firmware JDM market that are officially sold in Russia. The mod..

Registrar M74.8/M74.9 Niva

In stock

The module allows you to view and edit the registrar's data, which is stored in the EEPROM. When saving an EEPROM image, the checksums of the required EEPROM areas are automatically recalculated. ..

Siemens EMS3120 Lada Largus

In stock

The module allows you to produce a professional chip tuning Lada Largus cars equipped with ECU Continental EMS3120. Supported firmware versions: HW7908R_SW09350_90047 Features of the module: The possibility of open firmware (FullFlash only) in BIN format or SMS-Soft Container File. Automatic checksum when you save the firmware, including additional COP monitoring security. For additiona..

Siemens EMS3120 Logan/Sandero

In stock

The module allows you to produce a professional chip tuning for Renault Logan and Renault Sandero 2 2 that equipped with ECU Continental EMS3120. Supported IDs firmware module Logan/Sandero: HW4319R_SW4234R_4541R HW4319R_SW4234R_4928R HW4319R_SW4234R_4929R HW4319R_SW4234R_5992R HW4319R_SW4234R_6214R HW4319R_SW4234R_6215R HW4319R_SW4234R_6216R HW4319R_SW4234R_8641R ..

Siemens EMS3125 chest X-Ray, Renault Duster

In stock

The module allows you to produce professional chip tuning Lada X-Ray and Renault Duster/Kaptur, equipped with ECU Continental EMS3125. Supports any version of calibration based on series RDE450, RDE540, RDE570. Features of the module: About 550 of calibrations available for editing The possibility of open firmware (FullFlash only) in BIN format or SMS-Soft Container File. Au..

For chip-tuning for Renault (Logan, Sandero, Symbol), Nissan (Almera) and VAZ (Largus). ..

In stock

Siemens EMS3132 Renault

The module allows you to produce a professional chip tuning for Renault Logan, Renault Sandero, Nissan Almera engine 1.6 L, automatic transmission, equipped with ECU Continental/Siemens EMS3134. Supported versions: REA820 REA830 Features of the module: The possibility of opening the flash SMS-Soft Container File (new format for ChipTuningPRO and CombiLoader). The possibility of opening ..

In stock

Siemens EMS3134 Renault

This module allows you to make chip-tuning BMW MS42 ECU (engine MT52TU, Serie 3 E36, 5 E39 Serie) and MS43 (E46 Serie 3, Serie 5 E39, X5 E53). The module works in conjunction with ChipTuningPRO 7 or higher. The ECU programming is done using the loader CombiLoader. Maps contain more than 150 calibrations, including starting the calibration, ignition advance angle, fuel supply, injection phase timing VANOS, the coefficien..

In stock

Siemens MS42/MS43 BMW

For chip-tuning Opel cars with engines Z16XER and Z18XER. ..

In stock

Siemens Opel SIMTEC75

For chip-tuning Kia and Hyundai. ..

In stock

Siemens SIM2K-141/341

Additional module for chip tuning Chevrolet Spark M300 engine 1.25 L, ECU Continental (Siemens) SIM2K-243. Supported versions: 906FX2F2 906FX4F2 Features of the module: The possibility of opening the flash SMS-Soft Container File (new format for ChipTuningPRO and CombiLoader). The possibility of opening a firmware in BIN format (normal binary). Automatic checksum when you save the..

In stock

Siemens SIM2K-243

Siemens SIM2K-D160 Chevrolet Epica

In stock

The module is designed for chip tuning of Chevrolet Epica cars with 2.0L and 2.5L engines equipped with Siemens SIM2K-D160 ECU (5WY1B12G, 5WY1B18E, 5WY1B23E, 5WY1B41B, 5WY1B41D, 5WY1B41E, 5WY1B41F, 5WY1B42E, 5WY1B43E, 5WY1B46E, 5WY1B46F , 5WY1B60B, 5WY1B60C, 5WY1B60D, 5WY1B63D, 5WY1B63E, 5WY1B65A, 5WY1B65B, 5WY1B55G). In order to find out the firmware version of SIM2K-D160, you need to open the firmware file ..

Siemens SIMK43/SIMK41 Hyundai/Kia

In stock

For chip tuning Hyundai (Sonata, Elantra, Tiburon, Tucson, Coupe, Seed, Sportage etc.). ..

Siemens SIMTEC76 Chevrolet

In stock

For chip-tuning Chevrolet Cruze, Chevrolet Orlando engines Z16XER and Z18XER. ..

For chip-tuning Chevrolet of Russian and Ukrainian assemblies and Daewoo Matiz. ..

In stock

Siemens Sirius

For chip-tuning of cars Lifan. ..

In stock

Siemens Vagon VAx

For chip-tuning of cars Tagaz Tager/Road Partner and Ssang Yong Musso, Actyon, Rexton, Kyron petrol engines 2.3/2.8/3.2 L. ..

In stock

Siemens VDO MSE3.5

SIM28 Ford Focus II 1.6 L

In stock

For chip-tuning Ford Focus II with engines 1.4—1.6 L without adjustable phase timing, ECU Siemens SIM28. ..

SIM29 Ford Focus II 1.6 L

In stock

For chip-tuning Ford Focus II with engine 1.6 L with adjustable phase timing, ECU Siemens SIM29. ..

Supported versions: 906FX2F2 906FX4F2 Features of the module: The possibility of opening the flash SMS-Soft Container File (new format for ChipTuningPRO and CombiLoader). The possibility of opening a firmware in BIN format (normal binary). Automatic checksum when you save the firmware. For additional protection from accidental modifications of the data, which may affect the driv..

In stock

SIM2K243 GM

For chip-tuning Opel cars with engines Z10XEP, Z12XEP, Z14XEP. ..

In stock

The Bosch ME7.6.x Opel

The Bosch ME7.6.x Opel Z20LEx

In stock

For chip-tuning cars Opel turbocharged a series of engine Z20LEL, Z20LEH, Z20LER. ..

For chip-tuning of cars of Chinese production with electronic gas pedal. ..

In stock

The Bosch ME7.8.8 China

The Bosch ME7.9.20 Nissan

In stock

Additional module for chip tuning Nissan X-Trail 2.5 L, ECU Bosch ME7.9.20. The module works in conjunction with ChipTuningPRO 7.2018 or later. The ECU is equipped with an external (calibrated) and internal (management program) of the flash memory. Reading and writing to external memory is possible without watering chip flash, the BSL mode only using CombiLoader loader (and other loaders can't read external f..

For chip-tuning of cars Chery (QQ, Fora, B11, Acteco, Elara, Jagga, Eastar). ..

In stock

The Bosch ME7.9.7 China

The Bosch ME7.9.9 Chevrolet Captiva

In stock

For chip-tuning Chevrolet Captiva cars with engines 2.4 L. ..

The module allows for chip tuning cars Daewoo Gentra, equipped with ECU Delphi MT60. ..

In stock

The Delphi MT60

The M74, M86 (FOR vases), the Registrar

In stock

The module allows you to view and edit data recorder, which are stored in EEPROM (for the M74 only supports internal EEPROM 64KB). It is possible to work as with binary EEPROM images (files .eep), and with container SMS-Soft Container File (files .bcf). When you save the EEPROM image are automatically recalculated checksum of the service areas of the Registrar. ..

Cars Renault Duster 1.6 L and 2.0 L. ..

In stock

Valeo V42 Renault Duster

Valeo V42 Renault Logan/Sandero Stepway/Megane/Fluence

In stock

Cars Renault Logan/Sandero Stepway/Megane/Fluence with engines of 1.2 L and 1.6 L. ..

Valeo V46 Citroen/Peugeot

In stock

The module is designed for chip tuning Citroen/Peugeot with engines 1.2/1.6 L, equipped with ECU Valeo V46. Supported firmware for hardware version V46.21. The module works in conjunction with ChipTuningPRO 7.2016 or higher. The ECU programming is done using the loader CombiLoader. The cards contain more than 500 ECM calibrations Valeo: starting calibration, ignition advance angle and its correction, injection, ..

Visteon ESU-131 5M51/8M51

In stock

Module Visteon ESU-131 5M51/8M51 designed for chip-tuning Ford Focus II and C-Max with engine 1.8 and 2.0 L, model years 2005 to 2007. Supported versions: 5M51JD (2005) 5M51JE (2006) 5M51RC (2005) 5M51RE (2006) 5M51RF (2006) 5M51SC (2005) 5M51SF (2006) 5M51VC (2006) 8M51KA (2006) 8M51KB (2006) 7M51BB (2007) 6S61XB (2006, Ford Fiesta ST,..

Module Visteon ESU-411/418 7M51 designed for chip-tuning Ford Focus II and C-Max with engine 1.8 and 2.0 L, model years 2007 and 2012. Supported versions: 7M51AAG (2010) 7M51ABA (2007) 7M51ADA (2007) 7M51ABC (2008) 7M51ACD (2009) 7M51ADE (2009) 7M51ADG (2012) 7M51ABD (2010) 7M51ADF (2010) 7M51BAB (2010) 7M51BAD (2010) 7M51VC (2007) ..

In stock

Visteon ESU-411/418 7M51

This module allows you to chip-tune UAZ Pickup and Patriot 2023+ cars equipped with a Chinese AECS ECU. Programming of the ECU is carried out using the CombiLoader loader. When the firmware is saved, checksums are automatically recalculated. Research with the help of reverse engineering of the control program allowed us to create an unparalleled tool for high-quality chip tuning ..

In stock

М74.9 GAZ