MMC Flasher Modules

The kit includes the modules: 28 Module Ford EMS2204; 27 Module-Ford Bosch MED17.2; 22 Module, Ford, Siemens VDO EMS2102 and EMS2101; 21 Module Ford Diesel SID206; 19 Module Ford SIM210, SIM22; 15 Module-Ford Bosch ME 9.0 Petrol (Turbo); 14 Module Ford Diesel Delphi DCM3.5; 11 Module Ford Visteon ESU-312, 412, 415 Benzin; 9 Module Ford Visteon 131, ESU-411, 418 Benzin; 8 Module, Ford ..

In stock

*Set of modules Ford

The kit includes the modules: 28 Module Ford EMS2204; 27 Module-Ford Bosch MED17.2; 22 Module, Ford, Siemens VDO EMS2102 and EMS2101; 21 Module Ford Diesel SID206; 19 Module Ford SIM210, SIM22; 15 Module-Ford Bosch ME 9.0 Petrol (Turbo); 14 Module Ford Diesel Delphi DCM3.5; 11 Module Ford Visteon ESU-312, 412, 415 Benzin; 9 Module Ford Visteon 131, ESU-411, 418 Benzin; 8 Module, Ford ..

In stock

*Set of modules Ford

$270.68

In stock

*Set of modules Mazda

The kit includes the modules: 33 Module-Mazda SkyA 2.0 2.5 (ECU Denso) 31 Module-Mazda SkyA 2.0 2.5 (ECU Mitsubishi) 24 Module Mazda 1.3 1.5 1.6 AT/MT Denso from 2009+ 23 Module, Mazda CX5 2.2 Diesel 18 Module MH8110 Mazda CX7,3,6 2010+ 13 Module, Mazda Diesel Denso SH7058 (none BGA) 7 Module, Mazda M32r 4 Module, Mazda To restayl SH705x ..

$270.68

In stock

01 Module, h8/53x, SH7052,SH7055

The MMCFlash Module 01 (H8/53x, SH7052/SH7055) is a time-proven tool for full ECU data image read and write on Mitsubishi, Mazda, Subaru, Hyundai, Kia and Suzuki vehicles equipped with Renesas SH7052/SH7055 microcontrollers. It covers the complete workflow — ECU identification, full image read and full image write — for chip tuning, diagnostics and ECU recovery after failed flashing. Supported microcontrollers MH720..

02 Module, Mitsubishi M32r

In stock

The MMCFlash Module 02 (Mitsubishi M32R) is designed for Mitsubishi engine control units (ECUs) based on 32-bit Mitsubishi M32R RISC microcontrollers. It supports the full ECU memory workflow — calibration and full image read/write, DTC handling and checksum correction — for chip tuning, calibration, diagnostics and ECU recovery. Supported microcontrollers MH8102F (512 KB), MH8201F (512 KB), MH8202F (512 KB), MH8301..

03 Module, Mitsubishi Lancer X1.5, Outlander JDM

In stock

The MMCFlash Module 03 (Mitsubishi Lancer X 1.5, Outlander JDM) provides read and write of Mitsubishi ECUs based on 32-bit M32R microcontrollers — both engine control units and Active Center Differential (ACD) control units. The module supports two communication protocols: CAN bus for standard operation and K-line for repair mode, restoring the ECU from any state, including failed flashing or corrupted calibrations. Sup..

04 Module, Mazda Dorectal

In stock

The MMCFlash Module 04 (Mazda pre-facelift) is designed for engine control units (ECUs) of pre-facelift Mazda vehicles based on Renesas SH7058 (SH-2 family) microcontrollers. It covers the complete workflow — ECU identification, calibration and full image read/write, DTC handling — for chip tuning, calibration, diagnostics and ECU recovery after failed flashing. Supported ECUs Renesas SH7058; ECU part numbers L33P-1..

05 Module, Yamaha snowmobiles and Boats

In stock

The MMCFlash Module 05 (Yamaha Snowmobiles and Boats) is designed for engine control units (ECUs) of Yamaha outboard motors and snowmobiles based on M32R-series microcontrollers. It supports full ECU data image read and write with checksum correction for chip tuning, diagnostics and ECU recovery after failed flashing. Supported microcontrollers MH8102F — Yamaha F40, F50, F60 outboard motors (ECU not potted); MH8104F..

$121.81

In stock

06 Module-Mitsubishi Diesel Denso SH7058/7058S/7059

The MMCFlash Module 06 (Mitsubishi Diesel Denso SH7058/7058S/7059) is designed for diesel engine control units (ECUs) of Mitsubishi vehicles based on Renesas SH7058, SH7058S and SH7059 microcontrollers manufactured by Denso. It reads and writes calibrations, handles DTCs, and verifies and corrects the checksum — critical for writing modified firmware correctly and avoiding engine malfunctions. Supported microcontrollers..

The MMCFlash Module 07 (Mazda M32R) is designed for reading and writing engine control units (ECUs) of Mazda vehicles based on 32-bit M32R-series microcontrollers, with 1.8, 2.0 and 2.5 L engines, model year 2008 and later. Its key feature is ECU recovery from any state, including fully corrupted calibrations after a failed flash. Supported ECUs MH8106F; ECU part numbers L509-188K2-E, L596-188K2-C, L837-188K2-E, L84..

In stock

07 Module, Mazda M32r

070 Module, Isuzu Transtron

In stock

The MMCFlash Module 70 (Isuzu Transtron) is designed for reading the full data image and writing calibrations of Isuzu Transtron engine control units (ECUs). Supported microcontrollers SH7058, SH7059, SH72533, SH72544 — 547 ECU configurations (16010580, 16020030, 16020550, 18020130, 18020490, 18020840, 18020860, 18040690 and others). Compatible vehicles Isuzu cars, trucks and special machinery; engines 4HK1,..

08 Module Ford SIM28 and SIM29

In stock

The MMCFlash Module 08 (Ford SIM28 and SIM29) is designed for reading and writing calibrations of engine control units (ECUs) of petrol Ford vehicles with 1.4–1.6 L engines, produced approximately from 2004 to 2009. It supports SIM28 and SIM29 ECUs fitted to Ford’s high-volume models of the mid-2000s. Supported ECUs SIM28, SIM29. Compatible vehicles Ford Focus 2, C-MAX, Kuga, Fiesta, Fusion — the core petrol..

09 Module, Ford Visteon 131, ESU-411, 418 Benzin

In stock

The MMCFlash Module 09 (Ford Visteon ESU-131/411/418, petrol) reads and writes calibrations of petrol Ford engine control units (ECUs) with 1.8–2.3 L engines, built approximately from 2004 to 2011. It supports Visteon ESU platform ECUs in the ESU-131, ESU-411 and ESU-418 variants. Supported ECUs Visteon ESU-131, ESU-411, ESU-418. Compatible vehicles Ford Focus 2 and C-MAX with 1.8, 2.0 and 2.3 L engines (≈20..

$54.14

In stock

098 Module, Nissan Hitachi SH72531 EV/HEV

The MMCFlash Module 98 (Nissan Hitachi SH72531 EV/HEV) is designed for reading and writing calibrations of Hitachi SH72531 engine control units (ECUs) in Nissan and Infiniti hybrid vehicles. Supported microcontrollers Hitachi SH72531. Compatible vehicles Nissan and Infiniti hybrids (EV/HEV). Why choose this module Hybrid powertrain calibrations, including torque split between the engine and elect..

10 Module, Kia/Hyundai SIM2K 140/141/241/341

In stock

The MMCFlash Module 10 (Kia/Hyundai SIM2K-140/141/241/341) is designed for Hyundai and Kia engine control units (ECUs) based on SIM2K-family processors. It reads the full data image, writes calibrations and corrects the checksum — for chip tuning, diagnostics and ECU recovery after failed flashing. Supported microcontrollers SIM2K-140, SIM2K-141, SIM2K-241, SIM2K-341. Compatible vehicles Hyundai Accent, Elan..

103 Module Nissan Hitachi SH72533/SH72543

In stock

Supports full data image reading, full data image writing, identification, error reading/erasing, EEPROM reading/writing, checksum recalculation. Allows you to clone Gen1 and Gen2 ACU. ..

Reading calibrations Recording calibrations Reading/erasing errors Recalculation of CS ..

In stock

105 Module Isuzu Delphi

11 Module Ford Visteon ESU-312, 412, 415 Benzin

In stock

The MMCFlash Module 11 (Ford Visteon ESU-312/412/415, petrol) reads and writes calibrations of petrol Ford engine control units (ECUs) with 1.8–2.3 L engines, built approximately from 2004 to 2011. It supports Visteon ESU platform ECUs in the ESU-312, ESU-412 and ESU-415 variants. Supported ECUs Visteon ESU-312, ESU-412, ESU-415. Compatible vehicles Ford Mondeo IV, S-MAX and Galaxy with 1.8, 2.0 and 2.3 L en..

$54.14

In stock

12 Module, Simos 8.XX, PCR2.1

The MMCFlash Module 12 (VAG Simos 8.XX, PCR2.1) reads and writes calibrations of engine control units (ECUs) in VAG Group vehicles — Audi, SEAT, Skoda and Volkswagen. It identifies the ECU, reads and writes calibrations, handles DTCs and corrects the checksum. Supported ECUs Simos 8.XX — 1.4–2.0 TSI/TFSI petrol engines; PCR2.1 — TDI Common Rail diesel engines. Compatible vehicles Audi, SEAT, Skoda and Volksw..

$189.48

In stock

13 Module, Mazda Diesel Denso SH7058 (none BGA)

The MMCFlash Module 13 (Mazda Diesel Denso SH7058, non-BGA) reads and writes calibrations of Mazda diesel engine control units (ECUs) made by Denso, based on the Renesas SH7058 processor in a non-BGA package. ECU software versions RF7x and RF8x are supported. Supported microcontrollers Renesas SH7058 (non-BGA only); ECUs SH1K-188K2-E, SH1K-188K2-K. Compatible vehicles Mazda diesel vehicles with Denso SH7058 ..

14 Module Ford Diesel Delphi DCM3.5

In stock

The MMCFlash Module 14 (Ford Diesel Delphi DCM3.5) reads and writes calibrations of Ford diesel engine control units (ECUs) of the Delphi DCM3.5 family. Beyond calibrations, it handles configuration data and DTCs and corrects the checksum, while virtual read (VR) significantly speeds up reading. Supported ECUs Delphi DCM3.5. Compatible vehicles Ford Focus III 2.0 TDCi 115 hp; C-MAX II 2.0 TDCi 115 hp; Galaxy..

15 Module-Ford Bosch ME 9.0 Petrol (Turbo)

In stock

The MMCFlash Module 15 (Ford Bosch ME 9.0, turbo petrol) writes calibrations to Bosch ME 9.0 engine control units (ECUs) in turbocharged petrol Ford vehicles. The module supports writing only: the original data image must be obtained with another tool or from a third-party source. Supported ECUs Bosch ME 9.0. Compatible vehicles Turbocharged petrol Ford models with Bosch ME 9.0 ECUs. Why choose this modu..

18 Module MH8110 Mazda CX7,3,6 2010+

In stock

The MMCFlash Module 18 (Mazda MH8110, CX-7, Mazda 3, Mazda 6, 2010+) reads and writes calibrations of Mazda engine control units (ECUs) based on the MH8110F processor. It identifies the ECU, handles DTCs and corrects the checksum, so the ECU boots correctly after writing modified firmware. Supported ECUs MH8110F; ECUs L3CK-188K2-G, L587-188K2-B, L5E8-188K2-B, LFAR-188K2-B, LFFR-188K2-E, LFJP-188K2-A. Compatible ..

19 Module Ford SIM210, SIM22

In stock

The MMCFlash Module 19 (Ford SIM210, SIM22) reads and writes calibrations of petrol Ford engine control units (ECUs) with 1.3–1.6 L engines, built approximately from 2004 to 2009. It supports SIM210 and SIM22 ECUs fitted to Ford’s high-volume models of the mid-2000s. Supported ECUs SIM210, SIM22. Compatible vehicles Ford Focus 2, C-MAX, Kuga, Fiesta, Fusion with 1.3–1.6 L engines. Why choose this module ..

20 Module, Kia/Hyundai EDC17

In stock

The MMCFlash Module 20 (Kia/Hyundai EDC17) is designed for Hyundai and Kia diesel engine control units (ECUs) of the Bosch EDC17 family — EDC17C08 and EDC17CP14 with any TPROT protection level. Over the CAN bus it reads the full data image and writes modified calibrations, while virtual read (VR) significantly speeds up the work. Supported ECUs Bosch EDC17C08, EDC17CP14 (any TPROT level). Compatible vehicles ..

21 Module SID206 Ford Diesel

In stock

The MMCFlash Module 21 (Ford Diesel SID206) reads and writes calibrations of Ford diesel engine control units (ECUs) of the SID206 family. It identifies the ECU, handles DTCs and automatically corrects the checksum, without which modified firmware is not accepted. Supported ECUs Siemens/Continental SID206. Compatible vehicles Ford Fiesta 7 1.4 TDCi 68 hp; Galaxy 2 1.8 TDCi 100/125 hp, 2.0 TDCi 130/136/140 hp..

22 Module, Ford, Siemens VDO EMS2102 and EMS2101

In stock

The MMCFlash Module 22 (Ford Siemens VDO EMS2102, EMS2101) reads and writes calibrations of petrol Ford engine control units (ECUs) with 1.2–1.6 L engines. It supports Siemens VDO ECUs in the EMS2101 and EMS2102 variants. Supported ECUs Siemens VDO EMS2101, EMS2102. Compatible vehicles Ford Fiesta and Mondeo with 1.2–1.6 L petrol engines. Why choose this module Automatic checksum correction after..

23 Module, Mazda CX5 2.2 Diesel

In stock

The MMCFlash Module 23 (Mazda CX-5 2.2 Diesel) reads and writes calibrations of Mazda CX-5 2.2 diesel engine control units (ECUs) based on the Denso SH72543 processor. Beyond calibrations, it handles configuration data and DTCs and corrects the checksum. Supported ECUs Denso SH72543; ECUs SH06-188K2-M, SH06-188K2-T. Compatible vehicles Mazda CX-5 2.2D (SKYACTIV-D) of the corresponding model years. Why ch..

25 Module, Mitsubishi MH8115F & MH8601

In stock

The MMCFlash Module 25 (Mitsubishi MH8115F, MH8601) reads and writes Mitsubishi engine control units (ECUs) based on MH8115F and MH8601 processors. Over K-line (on the bench and via OBD2) it reads and writes the full processor dump, and over CAN it works with calibrations in standard mode. Supported ECUs MH8115F, MH8601; ECUs 1860B953, 1860B958, 1860C295, 1860C299, 1860C420, 1860C712, 1860C822, 1860C832 and others. ..

27 Module-Ford Bosch MED17.x

In stock

The MMCFlash Module 27 (Ford Bosch MED17.x) reads and writes calibrations of Ford engine control units (ECUs) of the Bosch MED17.x family based on the Infineon TC1767 processor. It converts stock firmware from the IDS database (VBF format) to binary, and virtual read (VR) significantly speeds up the work. Supported ECUs Bosch MED17.0, MED17.0.1 (Infineon TC1767) — 98 ECU configurations. Compatible vehicles P..

28 Module Ford EMS2204, EMS2207

In stock

The MMCFlash Module 28 (Ford EMS2204, EMS2207) reads the full data image and writes calibrations of Ford EMS2204 and EMS2207 engine control units (ECUs). It converts stock firmware from the IDS database (VBF format) to binary, corrects the checksum and supports ECUs protected by a digital signature. Supported ECUs EMS2204, EMS2207. Compatible vehicles Ford models with EMS2204 and EMS2207 ECUs of the correspo..

29 Module Subaru Hitachi/Unisia Jecs

In stock

The MMCFlash Module 29 (Subaru Hitachi/Unisia Jecs) reads the full data image (Full Flash) and writes calibrations of petrol Subaru engine control units (ECUs) made by Hitachi/Unisia Jecs. It identifies the ECU, handles DTCs and corrects the checksum. Supported ECUs SH7058, WA12212930WWW, WA12212940WWW, WA12212970WWW; ECUs 22611AK673, 22611AL840, 22611AL841, 22611AM030, 22611AM541, 22611AM780, 22611AN472, 22611AN630..

$121.81

In stock

30 Module Honda/Acura K-line

The MMCFlash Module 30 (Honda/Acura K-line) writes the full data image to Honda and Acura engine control units (ECUs) programmed over K-line. The module supports writing only: the original image must be obtained with another tool or from a third-party source. Supported ECUs 862 Honda/Acura K-line ECU configurations, including 37805-RCJ-336, 37820-PNC-305, 37820-PNC-306, 37820-PNC-307, 37820-PND-307, 37820-PND-405 an..

31 Module-Mazda SkyA 2.0 2.5 (ECU Mitsubishi)

In stock

The MMCFlash Module 31 (Mazda SkyActiv 2.0/2.5, Mitsubishi ECU) reads and writes calibrations of Mazda SkyActiv 2.0 and 2.5 L engine control units (ECUs) made by Mitsubishi with the MH8501 processor. It handles calibrations, configuration data and DTCs with correct checksum correction. Supported ECUs Mitsubishi MH8501; ECUs P51H-188K2-A, P51H-188K2-B, P5AA-188K2-C, PE01-188K2-M, PE02-188K2-M, PE03-188K2-L, PE08-188K..

The MMCFlash Module 32 (VAG K-line) reads and writes calibrations of Audi, SEAT, Skoda and Volkswagen engine control units (ECUs) programmed over K-line. It supports ECUs based on C167, ST10F296 and XC2785 processors fitted to VAG models of the early and mid-2000s. Supported ECUs C167, ST10F296, XC2785; ECUs 4HV, 7GV, 7GVE, SIMOS 7.1, SIMOS 7.1A, SIMOS 7PP. Compatible vehicles Petrol Audi, SEAT, Skoda, Volks..

In stock

32 Module, VAG Kline

33 Module-Mazda SkyA 1.5/1.6/2.0/2.5 (Denso ECU)

In stock

The MMCFlash Module 33 (Mazda SkyActiv 1.5/1.6/2.0/2.5, Denso ECU) reads and writes calibrations of Mazda SkyActiv engine control units (ECUs) made by Denso with the SH72543 processor. It handles calibrations, configuration data and DTCs with correct checksum correction. Supported ECUs Denso SH72543; ECUs PE1G-188K2-L, PE1H-188K2-M, PE1K-188K2-M, PE1L-188K2-L, PE1M-188K2-L, PE1P-188K2-M, PE1T-188K2-J, PE1T-188K2-L a..

The MMCFlash Module 34 (Nissan Hitachi TCM) reads and writes calibrations of Hitachi transmission control modules (TCMs) for automatic transmissions in Nissan and Infiniti vehicles. It identifies the unit, handles DTCs and corrects the checksum, while virtual read (VR) speeds up the work. Supported ECUs Hitachi TCM (transmission control modules). Compatible vehicles Nissan and Infiniti vehicles with Hitachi ..

In stock

34 Module Nissan TCM

35 Module SID208 PSA (Peugeot/Citroen)

In stock

The MMCFlash Module 35 (SID208 PSA, Peugeot/Citroen) is designed for Peugeot and Citroen diesel engine control units (ECUs) of the SID208 family. It reads and writes the full data image, writes calibrations and handles EEPROM, which holds configuration and immobilizer data. Supported ECUs Siemens/Continental SID208. Compatible vehicles Peugeot and Citroen Common Rail diesel vehicles with SID208 ECUs. Why..

36 Module Denso SH705x+eeprom

In stock

The MMCFlash Module 36 (Denso SH705x + EEPROM) reads and writes the full data image of Denso engine control units (ECUs) based on SH7055, SH7058 and SH7059 processors. It also handles EEPROM and provides safer writing: the processor is erased in 16 unequal blocks rather than byte by byte. Supported microcontrollers Denso SH7055, SH7058, SH7059. Compatible vehicles Mitsubishi, Mazda, Nissan, Subaru, Volvo, Is..

37 Module, Nissan/Infiniti Hitachi SH705x, SH7253x CAN

In stock

The MMCFlash Module 37 (Nissan/Infiniti Hitachi SH705x, SH7253x, CAN) reads the full processor dump and writes calibrations over CAN in Hitachi engine control units (ECUs) of Nissan, Infiniti and Renault vehicles based on SH7058, SH7059, SH72531 and SH72533 processors. Supported microcontrollers SH705519N (512 KB), SH705822N (1024 KB), SH705828N (1024 KB), SH705927N (1536 KB), S7253131N (1280 KB), S7253332N (2048 KB..

$162.41

In stock

38 Module Honda/Acura CAN

The MMCFlash Module 38 (Honda/Acura CAN) reads the full data image (Full Flash) and writes calibrations of Honda and Acura engine control units (ECUs) programmed over CAN. Nearly all such ECUs from various manufacturers are supported. Supported ECUs Matsushita (SH7058 1024K, SH72543 2048K), Continental (MPC5554 2048K), Temic (MPC5554 2048K), Keihin (MPC5566 3072K, SH72543 2048K, SH7058 1024K), Hitachi (SH7059 1536K,..

$162.41

In stock

39 Module, Nissan/Infiniti Hitachi/Unisia Jecs SH705x, K-line

The MMCFlash Module 39 (Nissan/Infiniti Hitachi/Unisia Jecs SH705x, K-line) reads and writes the full processor dump of Nissan and Infiniti engine control units (ECUs) made by Hitachi/Unisia Jecs over K-line. Fast read takes about 5 minutes for SH7058 and 2.5 minutes for SH7055; writing takes 25 and 15 minutes. Supported microcontrollers SH705415N, SH705507N, SH705513N, SH705520N, SH705524N, SH705529N, SH705821N, SH..

$121.81

In stock

40 Module, Suzuki Hitachi SH7058, K-line

The MMCFlash Module 40 (Suzuki Hitachi SH7058, K-line) reads and writes calibrations of petrol Suzuki engine control units (ECUs) made by Hitachi with the SH7058 processor over K-line. It identifies the ECU, handles DTCs and corrects the checksum (CRC). Supported microcontrollers Hitachi SH7058. Compatible vehicles Suzuki Escudo 2.7L and Suzuki Grand Vitara 2.7L. Why choose this module Correct CR..

41 Module, BMW Bosch F-series E-NET

In stock

The MMCFlash Module 41 (BMW Bosch F-series, E-NET) writes calibrations to Bosch DDE7xx and MEVD17.x engine control units (ECUs) of BMW F-series vehicles over E-NET (Ethernet). The module supports calibration writing only: the original image must be obtained with another tool or from a third-party source. Supported ECUs Bosch DDE701a, DDE721b, DDE73a, DDE731a, DDE741a, DDE742, DDE75, MEVD17.2, MEVD17.2.3, MEVD17.2.4,..

42 Module, Renault Gasoline

In stock

The MMCFlash Module 42 (Renault Gasoline) reads and writes calibrations of petrol Renault engine control units (ECUs) over CAN. It supports the main Renault ECU types — from Logan and Sandero to Duster — with correct checksum correction. Supported ECUs EMS3120 TC1738 (2048K) — Logan, Sandero, Fluence, Megane; EMS3110 TC1766 (1504K) — Fluence, Megane, Kangoo; EMS3125 TC1782 (2560K) — Duster, X-Ray; Sagem S3000 SH7055..

$87.97

In stock

43 Module Nissan Hitachi GEN2 2014+ SH72533 CAN

The MMCFlash Module 43 (Nissan Hitachi GEN2 2014+, SH72533, CAN) reads and writes calibrations of second-generation (GEN2) Hitachi engine control units (ECUs) with the SH72533 processor in Nissan and Infiniti vehicles from model year 2014 onward. It identifies the ECU, handles DTCs and corrects the checksum. Supported ECUs Hitachi GEN2, SH72533; ECUs 14BJ7A, 14CE3A, 14CE4B, 14EF2C, 15BF3A, 15CW0C. Compatible veh..

The MMCFlash Module 45 (Subaru Denso) reads the full data image and writes calibrations of Subaru engine control units (ECUs) made by Denso with SH72531, SH7058 and SH7055 processors. Both CAN and K-line are supported, including Japanese-market (JDM) units. Supported microcontrollers SH72531 (1280K, CAN, BRZ 2013+); SH7058 (1024K, CAN, 2007+); SH7058 (1024K, K-line, 2003+); SH7055 (512K, K-line); SH7055 JDM (512K, K..

In stock

45 Module, Subaru Denso

46 Module Ford DCU 101/102/104/201

In stock

The MMCFlash Module 46 (Ford DCU 101/102/104/201) reads and writes calibrations of Ford instrument cluster control units (Dashboard Control Unit, DCU). It is a specialized tool for instrument clusters and does not work with engine ECUs. Supported ECUs Ford DCU 101, DCU 102, DCU 104, DCU 201. Compatible vehicles High-volume Ford models with DCU 101, 102, 104 and 201 instrument clusters. Why choose this mo..

The MMCFlash Module 47 (Ford USA) reads and writes calibrations of US-market Ford and Mazda engine control units (ECUs) based on MPC561 and MPC565 processors. It identifies the ECU, handles DTCs and corrects the checksum. Supported ECUs MPC561, MPC565; ECUs PCM150, PCM170F, PCM190, M799G, Meg9.8.1 — 21 configurations in total. Compatible vehicles US-market Ford and Mazda vehicles (including US imports) of th..

In stock

47 Module Ford USA

48 Module Mazda SkyA 1.5/1.6/2.0/2.5 (ECU Denso Crypto)

In stock

The MMCFlash Module 48 (Mazda SkyActiv 1.5/1.6/2.0/2.5, Denso Crypto ECU) reads and writes calibrations of cryptographically protected Mazda SkyActiv engine control units (ECUs) made by Denso with SH72531, SH72543 and SH725x processors. It corrects the checksum while accounting for the crypto protection. Supported ECUs Denso SH72531, SH72543, SH725x (Crypto); ECUs PEJJ-188K2-C, PSCN-188K2, PYCV-188K2-C, S51K-188K2-E..

49 Module Ford SID208/SID209

In stock

The MMCFlash Module 49 (Ford SID208/SID209) reads the full data image and writes calibrations of Ford SID208 and SID209 diesel engine control units (ECUs). It supports BSL (Boot Sector Loader) mode, reads the password in OBD mode and unlocks the ECU in BSL for subsequent OBD writing. Supported ECUs Siemens/Continental SID208, SID209. Compatible vehicles Ford diesel models with SID208 and SID209 ECUs of the c..

50 Module, Kia/Hyundai EDC16

In stock

The MMCFlash Module 50 (Kia/Hyundai EDC16) writes calibrations to Hyundai and Kia diesel engine control units (ECUs) of the Bosch EDC16 family. The module supports writing only: the original image must be obtained with another tool or from a third-party source. Calibrations are written over K-line; calibrations and program over CAN. Supported ECUs Bosch EDC16C39-5.41, EDC16CP34-5.30. Compatible vehicles Hyun..

The MMCFlash Module 51 (Ford EMS2214) is designed for reading and writing calibrations of Ford EMS2214 engine control units (ECUs). Supported ECUs Ford EMS2214. Compatible vehicles Ford vehicles with EMS2214 ECUs of the corresponding model years. Why choose this module Virtual read (VR) — faster calibration retrieval Correct checksum correction after modifying fuel, ignition, rev and torque..

In stock

51 Module Ford EMS2214

The MMCFlash Module 52 (Ford EMS2205) is designed for reading and writing calibrations of Ford EMS2205 engine control units (ECUs). Supported ECUs Ford EMS2205. Compatible vehicles Ford vehicles with EMS2205 ECUs of the corresponding model years. Why choose this module Virtual read (VR) — faster calibration retrieval Correct checksum correction after modifying fuel, ignition, rev and torque..

In stock

52 Module Ford EMS2205

The MMCFlash Module 53 (Ford EMS2211) is designed for reading and writing calibrations of Ford EMS2211 engine control units (ECUs). Supported ECUs Ford EMS2211. Compatible vehicles Ford vehicles with EMS2211 ECUs of the corresponding model years. Why choose this module Support for ECUs that verify the digital signature Virtual read (VR) — faster calibration retrieval Correct checksum ..

In stock

53 Module, Ford EMS2211

54 Module Ford EMS2510 / EMS2511

In stock

The MMCFlash Module 54 (Ford EMS2510/EMS2511) is designed for reading and writing calibrations of Ford EMS2510/EMS2511 engine control units (ECUs). Supported ECUs Ford EMS2510, EMS2511. Compatible vehicles Ford vehicles with EMS2510/EMS2511 ECUs of the corresponding model years. Why choose this module Support for ECUs that verify the digital signature Firmware download from the Ford server ..

55 Module Ford DCM6.1 Diesel

In stock

The MMCFlash Module 55 (Ford DCM6.1 Diesel) is designed for reading and writing calibrations of Ford Delphi DCM6.1 diesel engine control units (ECUs) with the TC1797 processor. Supported ECUs Delphi DCM6.1 (TC1797) — 17 configurations. Compatible vehicles Ford diesel vehicles with DCM6.1 ECUs of the corresponding model years. Why choose this module Virtual read (VR) — faster calibration retrieval..

56 Module, VAG (Volkswagen/Audi) MED/EDC 17 UDS

In stock

The MMCFlash Module 56 (VAG MED/EDC17 UDS) is designed for writing calibrations to Audi, SEAT, Skoda and Volkswagen MED17 and EDC17 engine control units (ECUs) over UDS. The module supports writing only: the original image must be obtained with another tool or from a third-party source. Supported ECUs ME(D)17.1, 17.5, 17.1.1, 17.1.6, 17.5.5, 17.5.20, 17.5.21, 17.5.22, 17.5.24, 17.5.25, 17.5.26; EDC17C46, C54, C64, C..

$216.55

In stock

57 Module TCM Powershift 6DCT250

The MMCFlash Module 57 (TCM Powershift 6DCT250) is designed for reading and writing calibrations of the Ford Powershift 6DCT250 dual-clutch transmission control module (TCM). Supported ECUs TCM Powershift 6DCT250. Compatible vehicles Ford vehicles with the Powershift 6DCT250 dual-clutch transmission. Why choose this module A dedicated tool for transmission control units Virtual read (VR) — ..

$20.30

In stock

59 Module, Valeo V46 (Peugeot/Citroen)

The MMCFlash Module 59 (Valeo V46 (Peugeot/Citroen)) is designed for reading and writing calibrations of Valeo V46 petrol engine control units (ECUs) in Peugeot and Citroen vehicles. Supported ECUs Valeo V46. Compatible vehicles Petrol Peugeot and Citroen with Valeo V46 ECUs. Why choose this module Correct checksum correction after modifying fuel, ignition, rev and torque limiter maps ECU i..

$47.37

In stock

62 Module, Volkswagen AG TP2.0/KWP2000

The MMCFlash Module 62 (Volkswagen AG TP2.0/KWP2000) is designed for writing calibrations to Audi, SEAT, Skoda and Volkswagen engine control units (ECUs) using the TP2.0 and KWP2000 protocols. The module supports writing only: the original image must be obtained with another tool or from a third-party source. Supported ECUs VAG ECUs using the TP2.0 and KWP2000 protocols. Compatible vehicles Audi, SEAT, Skoda..

63 Module, Mitsubishi ETACS & ECU Coding

In stock

The MMCFlash Module 63 (Mitsubishi ETACS & ECU Coding) is designed for coding Mitsubishi engine control units and ETACS (Electronic Time and Alarm Control System) units. Supported ECUs Mitsubishi ETACS units and engine ECUs. Compatible vehicles Mitsubishi vehicles; available functions depend on model, year, market and firmware version. Why choose this module Configure features by market, year..

65 Module, Suzuki MH8115 MH8114

In stock

The MMCFlash Module 65 (Suzuki MH8115/MH8114) is designed for reading and writing the full data image of engine control units (ECUs) based on MH8115 and MH8114 processors. Supported ECUs MH8115, MH8114; ECUs 1AD5 18 881, 1AD7 18 881, 1ADW 18 881, 22611 4A05B, 22611 4A05D, 22611 4A05M, 33910-64P0, 33910-65P0 and others. Compatible vehicles Mitsubishi, Mazda, Nissan and Suzuki with MH8115/MH8114 ECUs. Why ..

The MMCFlash Module 66 (Ford EMS24xx) is designed for reading and writing calibrations of Ford EMS24xx engine control units (ECUs) with the TC1791 processor. Supported ECUs EMS24xx (TC1791) — 558 configurations. Compatible vehicles Modern Ford models with EMS24xx ECUs. Why choose this module 558 configurations — one of the widest Ford lineup coverages Firmware download from the Ford server ..

In stock

66 Module Ford ЕМЅ24хх

67 Module, BMW Bosch MED17/EDC17 E series

In stock

The MMCFlash Module 67 (BMW Bosch MED17/EDC17 E series) is designed for writing calibrations to Bosch MED17 and EDC17 engine control units (ECUs) in BMW and Mini E-series vehicles. The module supports writing only: the original image must be obtained with another tool or from a third-party source. Supported ECUs Bosch MED17, EDC17. Compatible vehicles BMW and Mini E-series with Bosch MED17/EDC17 ECUs. Wh..

69 Module, Denso Gen2 SH72xx

In stock

The MMCFlash Module 69 (Denso Gen2 SH72xx) is designed for reading and writing the full data image of second-generation (Gen2) Denso engine control units (ECUs). Supported microcontrollers SH72530, SH72531, SH72543, SH72546; ECUs 22765 AH570, 23740 3NL6A, 31312651AB, 31452623, 33920-84M6, 39105-4A020, 39105-4A540, 89663-E3R25B and others. Compatible vehicles Mitsubishi, Isuzu, Mazda, Nissan, Subaru, Volvo, H..

71 Module, Mitsubishi TCM\CVT\AT\4WD\ACD

In stock

$71 Module, Mitsubishi TCM\CVT\AT\4WD\ACD$

The MMCFlash Module 71 (Mitsubishi TCM CVT/AT/4WD/ACD) is designed for reading the full data image and writing calibrations of Mitsubishi transmission control modules (TCMs). Supported ECUs TCM CVT, AT, 4WD, ACD. Compatible vehicles Mitsubishi with CVT, automatic (AT), 4WD and Active Center Differential (ACD) systems. Why choose this module A dedicated tool for transmission control units Sh..

73 Module, Mercedes MED17\EDC17

In stock

$73 Module, Mercedes MED17\EDC17$

The MMCFlash Module 73 (Mercedes MED17/EDC17) is designed for reading and writing calibrations of Bosch MED17 and EDC17 engine control units (ECUs) with the TC1797 processor in Mercedes-Benz, Nissan and Infiniti vehicles. Supported ECUs Bosch MED17 (including MED17.7.2), EDC17; TC1797 processor. Compatible vehicles Mercedes-Benz, Nissan and Infiniti with MED17/EDC17 ECUs. Why choose this module M..

74 Module, Mazda TCM MH8104

In stock

The MMCFlash Module 74 (Mazda TCM MH8104) is designed for reading and writing the full data image of Mazda transmission control modules (TCMs) with the MH8104 processor. Supported ECUs MH8104; L31D 18 9E1B, L32E 18 9E1C, L33G 18 9E1C, L34H 18 9E1A, L3F2 18 9E1D, L3R1 18 9E1C, L539 18 9E1H, L5E4 18 9E1C. Compatible vehicles Mazda with automatic transmissions and MH8104 TCMs. Why choose this module ..

78 Module Gen4 Mazda Denso & Mitsubishi SKYACTIV G MY2019

In stock

The MMCFlash Module 78 (Mazda Gen4 Denso & Mitsubishi SKYACTIV-G MY2019) is designed for reading and writing calibrations of 2019 model year Mazda engine control units (ECUs) made by Denso (PYFB) and Mitsubishi (PYFA). Supported ECUs Denso PYFB, Mitsubishi PYFA. Compatible vehicles Mazda SkyActiv-G 1.5, 2.0, 2.5 and 2.5T, model year 2019 onward. Why choose this module Denso and Mitsubishi ECU..

79 Module, Yamaha & Kawasaki SH725xx

In stock

The MMCFlash Module 79 (Yamaha & Kawasaki SH725xx) is designed for reading and writing the full data image of Yamaha and Kawasaki motorcycle engine control units (ECUs). Supported microcontrollers SH725xx. Compatible vehicles Yamaha and Kawasaki motorcycles with SH725xx ECUs. Why choose this module Full data image for analysis, backup and ECU recovery Motorcycle tuning: fuel and ignitio..

80 Module, Nissan UDS Hitachi/Bosch/Continental

In stock

The MMCFlash Module 80 (Nissan UDS Hitachi/Bosch/Continental) is designed for reading and writing calibrations of Nissan and Renault engine control units (ECUs) made by Hitachi, Bosch and Continental over UDS. Supported ECUs R7F701*, TC1782, including Bosch EDC17C84. Compatible vehicles Modern Nissan and Renault with UDS ECUs. Why choose this module ECUs from three manufacturers: Hitachi, Bosch, ..

81 Module Mitsubishi EDC17CP52 / EDC7C4 / EDC16C31

In stock

The MMCFlash Module 81 (Mitsubishi EDC17CP52/EDC7C4/EDC16C31) is designed for reading and writing calibrations of Mitsubishi Bosch EDC17CP52, EDC7C4 and EDC16C31 diesel engine control units (ECUs). Supported ECUs Bosch EDC16C31, EDC7C4, EDC17CP52. Compatible vehicles Mitsubishi diesels of different generations with these ECUs. Why choose this module Three generations of Mitsubishi diesel ECUs in ..

The MMCFlash Module 82 (Isuzu Denso) is designed for reading and writing the full data image of Isuzu Denso engine control units (ECUs). Supported ECUs Denso ECUs in Isuzu vehicles. Compatible vehicles Isuzu vehicles with Denso ECUs. Why choose this module Bench Fullflash — analysis, backup and cloning Calibration write via OBD without removing the ECU Correct checksum correction afte..

In stock

82 Module, Isuzu Denso

85 Module Master, Isuzu Transtron с патчем NO READ

In stock

The MMCFlash Module 85 (Isuzu Transtron Master, NO READ patch) is designed for writing calibrations to Isuzu Transtron engine control units (ECUs). The NO READ patch allows writing modified calibrations without first reading the original firmware. Supported microcontrollers SH7058, SH7059, SH72533, SH72544. Compatible vehicles Isuzu with Transtron ECUs; engines 4HK1, 4JJ1, 6UZ1, 4JK1, 6HK1. Why choose th..

$296.40

In stock

85 Module Slave, Isuzu Transtron

The MMCFlash Module 85 (Isuzu Transtron Slave) is designed for writing calibrations to Isuzu Transtron engine control units (ECUs). The Slave version works together with the Module 85 Master and writes calibrations prepared and encrypted for your key. Supported microcontrollers SH7058, SH7059, SH72533, SH72544. Compatible vehicles Isuzu with Transtron ECUs; engines 4HK1, 4JJ1, 6UZ1, 4JK1, 6HK1. Why choos..

$49.40

In stock

86 Module, Isuzu UDS 4JJ3

The MMCFlash Module 86 (Isuzu UDS 4JJ3 (TC265D)) is designed for writing calibrations to Isuzu 4JJ3 engine control units (ECUs) with the TC265D processor over UDS. The module supports writing only: the original image must be obtained with another tool or from a third-party source. Supported microcontrollers Infineon TC265D (UDS). Compatible vehicles Isuzu and Mazda with the 4JJ3 diesel: commercial vehicles a..

$501.55

In stock

87 Module, Ford PowerStroke TCM

The MMCFlash Module 87 (Ford TCM PowerStroke) is designed for writing calibrations to the Ford automatic transmission control module (TCM PowerStroke). The module supports writing only: the original image must be obtained with another tool or from a third-party source. Supported ECUs Ford TCM PowerStroke. Compatible vehicles Ford F-250, F-350, F-450, Explorer, Edge, Territory and others with TCM PowerStroke...

88 Module, Ford OBD2 SID211

In stock

The MMCFlash Module 88 (Ford SID211 OBD2) is designed for reading the full data image and writing calibrations of Ford SID211 diesel engine control units (ECUs) with the TC1791 processor via OBD2. Supported ECUs Continental SID211 (TC1791). Compatible vehicles Ford Transit, Ranger and Tourneo Connect with the 2.0 EcoBlue diesel. Why choose this module Works via OBD2 without removing the ECU ..

89 Module, Ford Continental SID208 SID209 OBD

In stock

The MMCFlash Module 89 (Ford Continental SID208/SID209 OBD) is designed for reading the full data image and writing calibrations of Ford Continental SID208 and SID209 diesel engine control units (ECUs) via OBD2. Supported ECUs Continental SID208, SID209. Compatible vehicles Ford Common Rail diesels with SID208/SID209 ECUs. Why choose this module Works via OBD2 without removing the ECU Full ..

94 Module Master, Kawasaki MH8610

In stock

The MMCFlash Module 94 (Kawasaki MH8610 Master) is designed for reading and writing the full data image of Kawasaki motorcycle engine control units (ECUs) with the MH8610 processor. Supported microcontrollers MH8610. Compatible vehicles Kawasaki motorcycles with MH8610 ECUs. Why choose this module Full data image for analysis, backup and ECU recovery Create encrypted files for Slave keys (M..

$203.01

In stock

96 Module Slave, Kawasaki MH8610

The MMCFlash Module 96 (Kawasaki MH8610 Slave) is designed for writing the full data image to Kawasaki motorcycle engine control units (ECUs) with the MH8610 processor. The Slave version works only with a Master key (Module 94) and writes firmware encrypted for your key. Supported microcontrollers MH8610. Compatible vehicles Kawasaki motorcycles with MH8610 ECUs. Why choose this module The Master..

Module 106 "Denso Gen2 MPC5746R (1N83M)"

In stock

The MMCFlash Denso Gen2 MPC5746R (1N83M) module is designed for reading and writing the full data image of second-generation (Gen2) Denso engine control units (ECUs) based on the MPC5746R microcontroller (marking 1N83M). The module supports a wide range of vehicle brands — Isuzu, Mazda, Subaru, Suzuki and Toyota — that use Denso Gen2 ECUs with this microcontroller. The module supports reading a..

Module 110 "Isuzu TCM M32176"

In stock

The MMCFlash Isuzu TCM M32176 module is designed for writing calibrations to the transmission control module (TCM) of Isuzu vehicles that use the M32176 processor. The key feature of the module is that it supports only the calibration write operation (WC), which requires obtaining a data image beforehand with another tool or from a third-party source. The virtual read (VR) function makes it pos..

Module 100 "Nissan Hitachi TCM RE5"

In stock

The module supports: reading Full Flash 23 minutes recording calibrations 45 minutes (10000-70000) checksum recalculation identification reading/erasing errors ..