SID206 + SID208 + SID209 + SID211 Ford J2534 (kit)

The kit contains modules:

• Module SID206 designed for recording and(or) field calibration of the ECU SID206 vehicle 4 Ford Mondeo, Galaxy, S-Max, Kuga 1 with engines of 1.8—2.0 L.
• Module SID208 designed for recording and(or) field calibration of the ECU SID208, installable in particular on cars Ford Transit 2.2 L Diesel.
• Module SID209 designed for recording and(or) field calibration of the ECU SID209, installable in particular on cars Ford Ranger 3.2 L Diesel.
• Module SID211 designed for recording and(or) field calibration of the ECU SID211, installable in particular on cars Ford Transit 2.2 L Diesel.

• In the recording process from control UNIT reads the password to access the processor, which can be used for further work with the ECU module BSL TC17xx J2534.
• If the ECU checks the digital signature (RSA enabled), then an entry is modified in such a block is impossible. To disable digital signature verification, use the module BSL TC17xx J2534.

To work with the ECU SID208/SID209(CK4A), including full access to the FLASH EEPROM through the diagnostic connector, available empowerment module acquired in the form of additional licenses.

Reference to the program

Software and the operating instructions delivered with each kit of the bootloader on the CD.

The current version can always be downloaded on the website of the developer.

To activate additional modules CombiLoader:

1. Before to insert the usb key into your PC, be sure to install the driver Senselock dongle
2. Check that you have software version 2.16
3. Run the program and select the menu item Help – About the program
4. Double click on the serial number of the host adapter or dongle. All identification data will be copied to the clipboard
5. When ordering or at the first activation email. mail info@ecupro.ru press Ctrl-V to paste the data.
    
   Loader v2.16.5811 / 29.11.2015
   USB host number 00000000 v01.01.18
   Key No. 0000 0000 0000 0000 v01.84
    
6. Within 1-24 hours (usually 1-2 hours) on working days will send you activation codes for paid modules.
7. Activation codes are as follows (for example, real data may be different). The characters that you want to copy to window enter the code shown in bold.
    
   Activation codes (host adapter key 00000000 0000 0000 0000 0000):
   January-7.2+/M73: c6B/qfLyFYYxI1prLh0+4bUvFPHHmY3C
    
8. After receiving activation code in your application, select the menu item Help – Enter activation code. In the dialog box that appears, copy the one code of activation. Repeat for each new code.

Write review