ECU Siemens SIM2K C201/241/242/245 used cars Hyundai, Kia, SsangYong.
Module allows read/write FLASH memory diagnostic tool, without removing the ECU from the vehicle.
Works through the J2534 interface.
ECU Siemens SIM2K 140/141/341/D160 applies to the Kia (Magentis, Cerato, Carens, Sorento, Sportage), Hyundai (Sonata, IX35) with engines of 2.0 L and more, as well as the Chevrolet Epica.
The module allows reading and writing of programs or the field of calibrations, diagnostic method, without removing the ECU from the vehicle.
Included two versions of the module:
module working using adapter bootloader using K-line to communicate with the ECU
the module, working through the J2534 interface, use the K line or the CAN bus to communicate with the ECU
ECU Delphi MT38 used cars Kia (Carnival, Mohave, Opirus, Magentis, Sorento) Hyundai (Genesis, Grandeur, Santa Fe, Sonata IX55) with V6 engines 2.7/3.3/3.8 L.
The module allows you to read (only UNIT with K-Line) and write flash memory diagnostic tool, without removing the ECU from the vehicle. To read the firmware from the ECU with CAN use BSL TC17xx J2534.
Included two versions of the module:
module working using adapter bootloader using K-line to communicate with the ECU
the module, working through the J2534 interface, use the K line or the CAN bus to communicate with the ECU
ECU Delphi MT86 applies to the Kia (Cadenza, Quoris), Hyundai (Genesis, Equus) with V6 engines 3.3/3.8/5.0 L.
The module allows you to read calibrations and a record of the program/calibration diagnostic method, without removing the ECU from the vehicle. Read full flash from ECU use the module BSL TC17xx J2534.
Before to insert the usb key into your PC, be sure to install the driver Senselock dongle
Check that you have software version 2.16
Run the program and select the menu item Help – About the program
Double click on the serial number of the host adapter or dongle. All identification data will be copied to the clipboard
When ordering or at the first activation email. mail info@ecupro.ru press Ctrl-V to paste the data.
Loader v2.16.5811 / 29.11.2015
USB host number 00000000 v01.01.18
Key No. 0000 0000 0000 0000 v01.84
Within 1-24 hours (usually 1-2 hours) on working days will send you activation codes for paid modules.
Activation codes are as follows (for example, real data may be different). The characters that you want to copy to window enter the code shown in bold.
After receiving activation code in your application, select the menu item Help – Enter activation code. In the dialog box that appears, copy the one code of activation. Repeat for each new code.
We have fast worldwide delivery by EMS-post
We provide a guarantee for products and technical support
Our system of discounts and regular promotions save your money
