J2534 Mid adapter ChipSoft + K-Line + CANHacker

Adapter J2534 CHIPSOFT Mid will be useful for those users who didn't have enough power adapter CHIPSOFT J2534 Lite. Support for many third-party programs running on standard J2534 adapter makes an indispensable tool for diagnostics and tuning, and will allow you to start your business with minimum cost. The use of different modes of operation of the adapter (J2534 adapter, KLine adapter, CANHacker) greatly enhances its use.

Comparison table adapters CHIPSOFT J2534 Lite, Mid and Pro can be downloaded here.

Specifications CHIPSOFT Mid J2534 adapter:

• modern powerful 32-bit ARM processor 72 MHz
• work under control of operating system real-time (RTOS)
• support USB 2.0 Full-speed
• the device firmware upgrade through USB
• standard support J2534, partially - J2534-2
• reverse polarity protection, static voltage
• dual power for reliable operation (+5V USB connector +12V/+24V OBD2 connector)
• supply voltage programming 5 - 20V with a step of 0.1 V on pins 8, 9, 11, 12, 13 OBD2 connector, maximum supported current is limited by hardware at 20 mA.
• bus support Single wire CAN (SW-CAN)
• support second CAN BUS on pins 3 and 11 of the OBD2 connector (can also be perekrestova on pins 1 - 8, 12 - 13, by sealing the jumpers on the Board inside OBD2 adapter)
• mode indication through 3 LEDs
• A MiniUSB connector for connecting to the computer
• OBD2 enclosure

• ISO 11898 (raw CAN) up to 1Mb/s
• ISO 15765-4 (CAN)
• ISO 14230-4 (Keyword Protocol 2000)
• ISO 9141-2
• GM UART
• SW CAN

Adapter tested with diagnostic programs:

• PCMScan
• ScanXL
• Techstream
• VersaTuner

• ChipLoader (complete)
• OpenBox (complete)
• CombiLoader, MultiFlasher, MMC2 Flasher tested in the amount of available modules (i.e., not complete)
• PCMFlash

With dealer programs:

• Update
• Calibration Update Wizard (CUW)
• GDS2 (dealer diagnostics of cars GM group)

The adapter can operate in the following modes:

• J2534 adapter
• KLine adapter
• CANHacker

With the loaders:

• ChipLoader (complete)
• OpenBox (complete)
• PCM Flash
• CombiLoader, MultiFlasher, MMC Flasher tested in the amount of available modules (i.e., not complete)

Please note that the adapter Chipsoft implemented the Protocol J2534 according to the standards of this Protocol, however, test all the features listed on the software page have not been conducted, and full support for all features of these programs is not guaranteed.

Reviews (4)