VAZ/UAZ Bosch ME17.9.7 module 2 for owners of version ME17.9.7 module 1

Includes all the module 1, basic, not calibrated 3 performance firmware VAZ/UAZ ME17.9.7 and maps edit the 2nd and 3rd mode in this firmware. Works with regular (not compressed) format. This module INCLUDES the CONVERSION of a DIGITAL SIGNATURE! The edited firmware can be written as a diagnostic method (without disassembling the unit) or via BSL mode any existing bootloader (recommended to use MultiFlasher).

Opportunities 3 secure firmware VAZ/UAZ ME17.9.7 v2: Complete switching of all calibrations in the firmware. Added calibration for the organization of power enrichment in all modes. Switch the signal from DTV, normal mode DTV – 1st set of calibrations is less than 0.2 volts – 2nd set of calibrations, more than 3.1 volts (in the air) – 3rd set of calibrations. Firmware designed for the professional construction of systems with LPG and commercial multimode versions. *Current version - v2.1.

Before to insert the USB key into your PC, be sure to install the driver for Guardant key:

• Key driver x86
• Key driver x64

The Program MasterEditPro

Instructions for initial activation of:

1. To install the software and the dongle driver.
2. To start the Upgrade key (start-all programs-MasterEditPro-Upgrade key or help menu) and send the generated FILE-request for update on info@ecupro.ru indicating your order number.
3. After this do not generate new requests, and then sent the upgrade key will not install and will have to be regenerated.
4. While the key is not activated, none of the module, the program will issue an error and will not see the key-this is normal.

Manual for subsequent activations of the modules:

1. To start the Upgrade key (start-all programs-MasterEditPro-Upgrade key or help menu) and send the generated request to update the at info@ecupro.ru indicating your order number.
2. After this do not generate new requests, and then sent the upgrade key will not install and will have to be regenerated.

Write review