Oscilloscope Hantek DSO 6022BE

Oscilloscope Hantek 6022BE intended for use in applied electrical engineering and laboratory findings of high accuracy. Has 2 channels with a sampling rate of 48 MHz in single channel mode. The maximum range of the incoming signal without the divider from -4.5 to +4.5 volts. Resistance: 1 Mω, 25 pF. The mode of junction DC. The input protection Diode. OS: XP , VISTA, 7. The ability to connect multiple devices to one computer. The signal is stored in a txt / jpg / bmp, MS excel / word file. The device has triggers with the following mode: auto, normal, single. Types of trigger: on rising and falling edge, video, pulse width. The trigger source: channels 1 - 4. The buffer size is equal to 1 NS-2мкс - 1K; 5mks-2 MS - 128K; 5ms-20ms - 512K; 50ms-5000s - 1M. The bandwidth is 20 MHz. USB 2.0 interface requires no external power. Time ranges: 1 NS/division – 5000/division. The vertical resolution is 8 bits.

• USB 2.0 interface requires no external power.
• Suitable for use with portable computers. An aluminum case.
• Size (mm): 205(length) x 120(width) x 35(height). May be located both horizontally and vertically. Is a low square table.
• OS: Windows XP, VISTA, 7, 10
• The signal is saved in the following formats: text, jpg/bmp, MS excel/word file.
• To one computer you can connect multiple devices

Attention! When measuring voltage correctly set the attenuator on the probe! Too large measured voltage will damage the device and will jeopardize you and the computer is connected. Do not measure voltage more than 35V in mode, probe 1!

• Device - 1 PCs .
• USB cable - 1 PC.
• Probes - 2 PCs.
• Software on CD

Write review