Module 77 Bosch ME9/ MED9/ EDC7/ EDC16/ PSG16/ TCU Bootloader

Brand: ИП Вдовикин О. И.
Product Code: Модуль 77 PCMflash
Activate in 24 hours (usually 1-2 hours)
Reward Points: 180
Why do professionals
choose ECU Pro?
We have fast worldwide delivery by EMS-postWe have fast worldwide delivery by EMS-post
We provide a guarantee for products and technical supportWe provide a guarantee for products and technical support
Our system of discounts and regular promotions save your moneyOur system of discounts and regular promotions save your money

The module is designed to work in service mode with the ECU ME9/MED9/EDC16. It supports reading and writing the built-in flash memory of the MPC556/MPC562/MPC564 microcontrollers, external flash memory and EEPROM, as well as checking and correcting CS and RSA signatures (except for the MED9 VAG ECU).

The operation requires a direct connection to the ECU connector and a Scanmatik 2/Pro adapter. Or "Powerbox for PCMflash" plus one of the tested J2534 adapters.*

  • ME9/MED9/EDC7/EDC16/PSG16/TCU (MPC556/MPC562/MPC564) [RD/WR/CK]
  • ME9/MED9/EDC7/EDC16/PSG16/TCU EXT (MPC556/MPC562/MPC564) [RD/WR/CK]
1) Scanmatik 2 (with a modified k-line) or Scanmatik 2 PRO (make sure that the latest version of the drivers is installed), with a Boot / Bench cable, etc. - similar to the 71st module.
2) Almost any j2534 adapter with normal k-line support in the presence of "Powerbox for PCMflash" (either "new" or "modified" for the 71st package). In this case, the GPT signals are taken from the Powerbox. The power supply is controlled automatically (the switch is in the AUTO position), and the BOOT must be set to the MANUAL position. It is important. If the adapter is equipped with boot pins (OP2, Chipsoft Lite/Mid/Pro, Scanmatik 2/Pro), then you can also set the AUTO position, but it is more convenient not to think about it. Checked all of the above list, plus Dialink, Mongoose (different types).

Before to insert the USB key into your PC, be sure to install the driver for Guardant key:

  • Key driver x86 
  • Key driver x64 
  • Manual for primary activation key 
  • The Program PCMflash 
  • Help for working with the program (the demo with links to purchase the full version) 

Instructions for the initial activation PCMflash:>

  1. In the archives 'manual for primary activation, key' program GRDTRU. With its help, create the FILE request to update the key and send us on indicating your order number.
  2. Do not create new requests. Don't move the key to other PC before the end of activation. After you receive from us file-the updates are inserted in GRDTRU and be sure to send us the latest FILE-response.
  3. After this, log into the settings of the program PCMflash and paste a special code that you send, click Activate. After restarting the program can be used. The key can be used on any PC.

Instructions for the second and subsequent activations of the modules PCMflash:

  1. Make an order for the modules you require in the 'order only If the activation of the modules' indicate the serial number of your USB key PCMflash. The file request from GRDTRU send is not necessary.
  2. After you receive activation code you must enter in the program settings PCMflash and paste this code then click Activate. After restarting the program can be used.

Write a review

Your Name:

Your Review:

Rating: Bad           Good

Write review

add to cart

Shopping cart
2014-2022 Equipment for car diagnostics and chip-tuning, tools and equipment for auto service - ECU Pro ©
Home Info Account Chat