Download the current version of the program and reference materials: https://pcmflash.ru/downloads/
Since December 1, there have been changes in the PCMflash firmware Loader:
-
53 module - new price 18000r (against 20000r)
-
58 module - there is no discount option anymore, 20000r
-
71 module - there is no discount option anymore, the new price is 18000r (against 20000r)
-
77 module - new price 18000r (against 15000r)
New modules and protocols have also been added.:
1. Module 79 Mitsubishi CAN-bus Bootloader, designed to work with the ECU of Mitsubishi cars of various brands on the "table". Supports read, write, review, and correction checksums:
-
CAN bus Bootloader FLASH (MH8114F/MH8115F/MH8501F) [RD/WR/CK]
-
CAN bus Bootloader EEPROM (MH8114F/MH8115F/MH8501F) [Test] [RD/WR]
-
CAN bus Bootloader FLASH (MH8601F/MH8610F/MH8611F/1N83M) [RD/WR/CK]
-
CAN bus Bootloader EEPROM (MH8601F/MH8610F/MH8611F/1N83M) [Test] [RD/WR]
2. The 80 Denso SH725xx Bootloader module, designed to work on a "table" with Denso ECUs using SH725xx series microcontrollers. Supports reading, writing, checking and correcting checksums:
-
SH725xx FLASH [RD/WR/CK]
-
SH725xx EEPROM [RD/WR]
3. Module 81 JLR Gearbox, designed to work with the Bosch ECU automatic transmission 6HP, 8HP a / m JLR through the diagnostic connector of cars. Supported read, write, check checksum correction:
-
ZF 6HP26/6HP28 TCM (MPC5xx) [RD/WR/CK]
-
ZF 8HP70 TCM (SH725xx) [RD/WR/CK]
4. In the Mazda Generation 1 module 8, support has been added for the Denso ECU used in the US market with LF motors. Supports reading, writing, checking, correction of checksums:
-
2.0L LF USA (Mazda3 -2009/1MB) [RD/WR/CK]
5. Support for the SIMOS12.1/SIMOS12 ECU has been added to the module 57 "SIMOS 8/10/11/12/PCR2.1".2. Virtual reading, writing via auto diagnostic connector, checking and correction of checksums are supported:
-
1.8L, 2.0L TSI (SIMOS12.1/SIMOS12.2) [VR/WR/CK]
6. In module 68 "JLR Denso" added support for another protocol for the Denso ECU installed in a Range Rover. Supports reading, writing, checking and correcting checksums:
-
Jaguar XF/XJ/XK (X250/X350/X351/X150) 3.0L V6, 3.5L V8, 4.2L V8/SC (Denso) [RD/WR/CK]
-
Range Rover/Sport/Discovery 3 4.0L V6, 4.4L V8, 4.2L V8/SC (Denso) [RD/WR/CK]
-
Freelander 2 (L359) 3.2L V6 233PS (Denso) [RD/WR/CK]
-
Range Rover (L320/L322/L319), Jaguar (X150/X250/X351) 5.0L V8/SC (Denso)[RD/WR/CK]
7. In the module 69 "Mercedes-Benz MED17/EDC17", support for the ME9.7 ECU used with the M156, M272, M273 engines has been added. Supports reading and writing calibrations, checking and correcting checksums:
-
M156/M272/M273 (ME9.7) [RD/WR/CK]
8. In module 77 "Bosch ME9/MED9/EDC7/EDC16/PSG16/TCU Bootloader" added full support ECU EDC7, including EDC7C1 and EDC7C3, and ECU RE5RO5A transmission, 6HP various modifications, A5SR1/A5SR2/A6GF1:
-
ME9/MED9/EDC7/EDC16/PSG16/TCU (MPC556/MPC562/MPC564) [RD/WR/CK]
-
ME9/MED9/EDC7/EDC16/PSG16/TCU MICRO (MPC556/MPC564) [RD/WR/CK]
-
ME9/MED9/EDC7/EDC16/PSG16/TCU EXT (MPC556/MPC562/MPC564) [RD/WR/CK]
-
ME9/MED9/EDC7/EDC16/PSG16/TCU EEPROM (MPC556/MPC562/MPC564) [RD/WR]
